Cored wire electrode for highly wear-resistant coatings
TeroMatec 4395, Ø 2.8mm, 15.0 kg
Self-protecting iron-based metal powder cored wire electrode for the application of wear protection coatings and hardfacings against abrasion and erosion. The patented alloy consists of an iron matrix with a high proportion of evenly distributed, ultra-hard borides, chromium carbides and intermetallic compounds.
The special feature of the microstructure is the nanostructure of the matrix, which achieves the highest hardness and resistance to abrasive wear to date. The coatings exhibit hardening cracks and can only be machined by grinding. The number and size of cracks can be reduced by applying a buffer layer or preheating.
The cored wire can be welded over a wide parameter range, which also makes it possible to coat edges. The maximum hardness is achieved in the second layer.
Technical data
DIN EN 14700: T Z Fe 8
Hardness: 66 - 68 HRC (matrix 1st layer)
Hardness: 67 - 71 HRC (matrix 2nd layer)
Applications
For hard coatings on unalloyed, low-alloy and high-alloy steels in the steel, cement and recycling industries, mining and components of transportation machinery. Applications in the chemical industry and road construction can also be covered.
The alloy is excellently suited for protection against abrasion and erosion, whereby no strong impacts occur. Application to cast iron is also generally possible, but not optimal.
Typical applications:
Transport and compaction screws, enclosures for crushing units, valve gate blades chain conveyors, excavator shovels, mill rollers, etc.
Processing instructions
Remove damaged material and clean the welding area. Preheat to 100 - 300 °C depending on the carbon equivalent of the base material and ensure slow cooling.
Two-pass welds should be welded without intermediate cooling. Weld with short, spray or pulsed arc. Use plastic core and contact tip as for aluminum welding. For surfacing on manganese hard steels or air-hardening steels, buffer layers should be welded with e.g. EnDOtec DO*02 to reduce the number of hardening cracks.
Welding positions: PA, PB, PC
Type of current: = (+)
Shielding gas: without
Specification
Code | 103721 |
---|---|
Category | Wear resistant |
Number in package | 15.0 Kg |
Price per unit | 89,1533 € / Kg |
Price excl. VAT | 1.337,30 € |
Price incl. VAT 21% | 1.618,13 € |
Availability | within 7 to 10 days |
Other products in the category
TeroMatec 4415 - Cored wire electrode
973,50 € 64,90 € / KgCored wire electrode for emery-resist...
TeroMatec 3205 - Cored wire electrode
853,20 € 56,88 € / KgCored wire electrode for impact-resis...
TeroMatec 4415 - Cored wire electrode
808,31 € 53,89 € / KgCored wire electrode for surfacing an...