AluTin 51 L - Flux

Flux

AluTin 51 L

AluTin 51 L is a flux which is supplied in liquid form. It is intended for soldering aluminum and joining aluminum with copper, brass or copper-aluminum.

Technical data
Product color: yellow
Working temperature range: 120 - 350 °C
pH: 10 - 11
Density: 1.3

It can be moderately diluted with distilled water or ethyl alcohol.

Applications
This flux is mainly used with AluTin 51 alloys.
aluminum compounds (Si + Mg < up to 2 %) or for the dissimilar connection of copper/aluminum.

Processing instructions
Preparation

• If necessary, clean the joint surfaces and round off sharp edges.

• Degrease the parts with a suitable solvent.

• Coat all connecting parts with AluTin 51 L flux.

• Bring the parts into their final position.

• Set the welding torch so that you obtain a gentle, slightly carburizing flame.

• Heat the parts to be joined indirectly and evenly to the joining temperature.

• Do notoverheat the flux to avoid damage and do not hold the flame directly on the flux.

• Hold the end of the filler alloy rod to the joint.

• The filler alloy metal will spread to the hottest areas of the surfaces to be joined.

• Melt the filler alloy metal until the joint is completely filled.

Cleaning

• The residues of the AluTin 51 flux are water-soluble.

• They are usually removed by washing in hot water.

Delivery form
Packaging: Plastic bottle from 0.15 kg to 1 kg.