ToolTec 54023 DW Slag-free filling TIG rod

ToolTec 54023 DW, 1.2mm

Slag-free NiFe-based filler rod. Austenitic weld metal with embedded nodular graphite. Not susceptible to porosity. Improved hot cracking resistance due to Mn addition. Can be machined.

Technical data
DIN EN ISO 1071: T C NiFe-2
Material no.: ~ 2.4560

Applications
For non-alloy joint and build-up welding (cast iron cold welding) of cast iron with lamellar or spheroidal graphite, malleable cast iron and for joining cast iron with steels.
Typical applications are
Large fittings, machine tool slides, bearing points, slide rails, gear wheels, turbine blades
and housings, crankshaft housings and slide valve seats.

Processing instructions
Remove cracked and otherwise damaged material as well as the casting skin. Clean welding areas. Generally weld without preheating. Use line bead technique with low line energy.
Weld workpieces subject to shrinkage, especially those made of laminar cast iron, with short beads (1-3 cm long). Immediately after welding, hammer off the weld beads when red hot.

Welding positions: PA, PB, PC
Type of current: = (-)
Shielding gas: EN ISO14175 I1 (100 % Ar)

Packaging dimensions
Ø 1.2 x 1,000mm 1.0kg