Cored wire electrode for wear-resistant hard coatings
EnDOtec DO*390 N, Ø 1.6mm, 15.0 kg
Iron-based metal powder cored wire electrode for the application of wear protection coatings and hardfacings for abrasion and erosion. The patented alloy consists of an iron matrix with a high proportion of evenly distributed, ultra-hard borides, chromium carbides and intermetallic compounds. The special feature of the microstructure is the nanostructure of the matrix, which achieves the highest hardness and resistance to abrasive wear to date. These properties are retained even when used at temperatures of up to 750 °C.
The coatings exhibit hardening cracks and can only be machined by grinding. The number and size of cracks can be reduced by applying a buffer layer or preheating. The cored wire can be welded over a wide parameter range, which also makes it possible to coat edges. The maximum hardness is achieved in the second layer.
Technical data
DIN EN 14700: T Z Fe 8
Hardness
Matrix 1st layer: 66 - 68 HRC
Matrix 2nd layer: 67 - 71 HRC
Applications
For hard coatings on unalloyed, low-alloy and high-alloy steels in the steel, cement and recycling industries, mining and components of transportation machinery. Applications in the chemical industry and road construction can also be covered.
The alloy is excellently suited for protection against abrasion and erosion, whereby no strong impacts occur. Application to cast iron is also generally possible, but not optimal.
Typical application examples are
Transport and compaction screws, enclosures for crushing units, valve gate blades
chain conveyors, excavator shovels, mill rollers, etc.
Processing instructions
Remove damaged material and clean the welding area. Preheat the base material to 100 - 300 °C and ensure slow cooling. Two-pass welds should be welded without intermediate cooling. Weld with a short, spray or pulsed arc. Use plastic core and contact tip as for aluminum welding.
For surfacing on manganese hard steels or air-hardening steels, buffer layers should be welded with e.g. EnDOtec DO*02 to reduce the number of hardening cracks.
Welding positions: PA, PB, PC
Type of current: = (+)
Shielding gas: according to EN ISO 14175
M12 - Inoxmix C2 (max. 2.5 % Co2 - rest Ar)
M21 - Ferroxmix C8 (max. 18.0 % CO2 - rest Ar)
Shielding gas volume: 16 - 20 l/min
Specification
Code | 103389 |
---|---|
Category | Wear resistant |
Number in package | 15.0 kg |
Price per unit | 64.798,2893 Ft / kg |
Price excl. VAT | 971.974,34 Ft |
Price incl. VAT 27% | 1.234.407,41 Ft |
Availability | Not in stock |
Other products in the category
EnDOtec DO*310 Seamless flux-cored wire
97.508,83 Ft 6.500,59 Ft / kgSeamless flux-cored wire for semi-aut...
TeroMatec 4923 - Cored wire electrode
347.844,58 Ft 23.189,64 Ft / KgCored wire electrode for emery-resist...
EnDOtec DO*48 Flux cored wire
1.200.878,91 Ft 80.058,59 Ft / kgFlux cored wire for highly abrasion r...