MetaCeram 28085 Ceramic powder

Ceramic powder for high-temperature coatings

MetaCeram 28085

Stabilized zirconia with very good thermal shock resistance. The maximum temperature (in continuous operation) is approx. 900 °C. Is not or only very slightly wetted by molten metal and also has very low thermal conductivity. The coating hardness is approx. 300 - 500 HV with simultaneously increased ductility against other ceramics.

Technical data
Hardness [HV 0.01]: 300 - 500*
Grain size distribution [μm]: 63/15

Applications
For flame spraying without melting of unalloyed, low-alloy and high-alloy steels and the corresponding cast steel grades.

Typical application examples are
Components which are subject to increased temperature changes. Components that come into contact with molten metal - e.g. feed hoppers for aluminum die casting.

Processing instructions
Remove damaged material. Round off or chamfer edges. Clean spray areas, preheat to 50 - 150 °C and roughen. Spray on a layer of primer powder in the preheated state. Maintain spray coat temperature between 80 °C and 160 °C and apply up to the desired coat thickness. Maintain a layer thickness of 0.6 - 0.7 mm. Allow to cool in still air.

Sprayer: CastoDyn DS 8000
Primer powder: ProXon 21021

*The achievable hardness values depend on the selected spraying parameters, preheating temperatures, etc. No guarantee can therefore be given that the hardness values will be achieved.

Specification

Code 702710
Category MetaCeram
Number in package 5.0 kg
Price per unit €143.46 / kg
Price excl. VAT €717.30
Price incl. VAT 23% €882.28
Availability within 7 to 10 days
Material Safety data Sheets

Related Products