Ceramic powder for wear-resistant coatings
MetaCeram 28030
White ceramic powder based on corundum. High stabilization content improves layer strength, impermeability and reduces susceptibility to cracking and porosity. Electrical and thermal insulation material. High resistance to adhesion. Resistant to metallic sliding friction, lubricated and unlubricated. Good emergency running properties.
Technical data
Hardness [HV 0.01]: 1,200*
DIN EN 1274: ~ 12.4 - 63/15 - agglomerated
Grain size distribution [μm]: 45/22
Applications
For flame spraying without melting of unalloyed, low-alloy and high-alloy steels and the corresponding cast steel grades.
Typical application examples are
Components from textile machines such as rollers, drafting carousels and thread guides; wear-resistant components for the production of resistance wires.
Processing instructions
Remove damaged material. Round off or chamfer edges. Clean spray areas, preheat to 50 - 150 °C
and roughen. Spray on a layer of primer powder in the preheated state. Maintain spray coat temperature between 80 °C and 160 °C and apply up to the desired coat thickness. Maintain a layer thickness of 0.4 - 0.7 mm. Allow to cool in still air.
Sprayer: CastoDyn DS 8000
Primer powder: ProXon 21021
*The achievable hardness values depend on the selected spraying parameters, preheating temperatures, etc. No guarantee can therefore be given that the hardness values will be achieved.
Specification
| Code | 203007 |
|---|---|
| Category | MetaCeram |
| Number in package | 1.2 kg |
| Price per unit | 83.154,6 Ft / kg |
| Price excl. VAT | 99.785,52 Ft |
| Price incl. VAT 27% | 126.727,61 Ft |
| Availability | within 7 to 10 days |
