for machinable coatings
RotoTec LubroTec 19985
Metal powder based on a NiCrFe alloy. Tough matrix with finely dispersed, oxidic hard materials. High resistance to adhesion. Good resistance to metallic sliding friction, lubricated and unlubricated. Corrosion resistant. Can be machined. Spray coatings are heterogeneous and microporous.
Technical data
Coating hardness [HV 10]: 200*
Grain size distribution [μm]: 38 - 125
Density [g/cm³]: approx. 8.1
Applications
For flame spraying without melting of unalloyed, low-alloy and high-alloy steels and the corresponding cast steel grades.
Typical applications are
Plain bearing journals, seats of ball bearings, roller bearing seats of electric motors, shaft seats with and without keyways and splines, end shield and gearbox bores, raceways and slideways.
Processing instructions
Remove damaged material. Round off or chamfer edges. Clean spray areas, preheat to 50 - 150 °C and roughen. Spray on a layer of primer powder in the preheated state. Maintain spray coat temperature between 50 °C and 200 °C and apply up to the desired coat thickness. Do not exceed a layer thickness of 2 mm. Allow to cool in still air.
Spray gun: CastoDyn DS 8000
Primer powder: ProXon 21021
*The achievable hardness values depend on the selected spraying parameters, preheating temperatures, etc. No guarantee can therefore be given that the hardness values will be achieved.
Specification
| Code | 100644 |
|---|---|
| Category | RotoTec |
| Number in package | 1.35 kg |
| Price per unit | 194.946,8593 Ft / kg |
| Price excl. VAT | 263.178,26 Ft |
| Price incl. VAT 27% | 334.236,39 Ft |
| Availability | within 7 to 10 days |
