Metal powder for abrasion-resistant coatings
EuTroLoy 16659
Metal powder for build-up welding PTA or laser cladding. Hypereutectic FeCrC weld metal. Permissible operating temperature up to 600 °C. Very good resistance to abrasion by abrasive, mineral materials, even in combination with medium impact stress. Can only be machined by grinding.
Technical data
DIN 8555: ~Metal powder 10 - 60 - GPR
Manufacturing process: gas atomized
Hardness - single layer [HRC]: 56*
Hardness - double layer [HRC]: 59*
*The hardness achieved depends on the spraying parameters and may vary.
Applications
For hardfacing carbon steels, alloyed and unalloyed steels and manganese hard steels.
Typical applications are
Wear plates, mixer blades, transport augers, scraper and excavator buckets, earth drilling equipment.
Applications
Remove cracked or damaged material. Clean welding areas. Adjust the heat input during welding to the component, its material and dimensions. Weld austenitic manganese steels as cold as possible (below 250 °C) without preheating. Welding a buffer layer is recommended for hardenable steels. Limit the height of the deposits to two layers or 6 mm.
Specification
Code | 768426 |
---|---|
Category | Fe-based |
Number in package | 5.0 kg |
Price per unit | 73,28 € / kg |
Price excl. VAT | 366,40 € |
Price incl. VAT 25% | 458 € |
Availability | within 7 to 10 days |