GreenFlux 1600 PF Flux

GreenFlux 1600 PF

GreenFlux 1600 PF Atmosin is a universal brazing flux based on complex potassium salts and potassium fluoroborates. Free of hydrofluoric acid. Free of substances classified as CMR substances. Without hazardous substance labeling.

Technical data
DIN EN 1045: FH10
Product color: orange
Density: > 1.7
pH: 4
Application temperature: 600 - 800 °C

Applications
GreenFlux1600 PF Amosin is preferably used in combination with low-melting four-component silver brazing alloys such as:
1655, 1665, 1666, 1800 etc.
For capillary brazing of steel, including stainless steel, copper, brass and bronze, with the exception of aluminum bronze.

Processing instructions

Preparation

• If necessary, clean, degrease and deburr joint surfaces.
• Apply flux to the joining area, e.g. with a brush.
• Position and fix the parts in their final position

Soldering process
For torch soldering:

• Set the torch to a neutral or slightly carburizing flame. Heat the parts to be joined evenly to soldering temperature.
• Melt the solder until the soldering gap is completely filled.

Reworking

• The flux residues have a corrosive effect and must be removed from the solder joint.
• The flux residues can be removed with hot water or soaking in cold water followed by rinsing.
• Flux residues can also be removed mechanically, for example by brushing, grinding or sandblasting.