ProXon 21031 Metal powder

for adhesion-resistant coatings

ProXon 21031

Metal powder based on a NiCrAlMoFe alloy. Self-adhesive, can be applied without primer. Corrosion and weather resistant. High resistance to adhesion and erosion. Good resistance to metallic sliding friction, lubricated and unlubricated. Can be machined.

Technical data
Hardness [HV 10]: 255*
Grain size distribution [μm]: 38 - 125
Density [g/cm3]: 8.6

Applications
For flame spraying unalloyed, low-alloy and high-alloy steels and the corresponding cast steel grades as well as copper alloys with a Cu content < 95 %, fine zinc alloys, light metal, nickel and cobalt alloys.

Typical application examples are:
Bearing and press fits, wear rings, sliding surfaces, rotor blades and guide vanes.

Processing instructions
Remove damaged material. Round off or chamfer edges. Clean spray areas, preheat to 50 - 150 °C and roughen. Apply in preheated condition up to the desired layer thickness. Maintain spray coat temperature between 50 °C and 200 °C. Adjust primer coats to a layer thickness of 0.2 - 0.3 mm, otherwise do not exceed 2 mm. Allow to cool in still air.

Sprayer: CastoDyn DS 8000

*The achievable hardness values depend on the selected spraying parameters, preheating temperatures, etc. No guarantee can therefore be given that the hardness values will be achieved.

Specification

Code 767188
Category ProXon
Number in package 2.5 kg
Price per unit 310,528 € / kg
Price excl. VAT 776,32 €
Price incl. VAT 25% 970,40 €
Availability Not in stock

Video

Material Safety data Sheets

Related Products