EnDOtec DO*24 S Flux-cored wire

EnDOtec DO*24 S, Ø 1.2 mm, 15.0 kg

Slag-forming flux-cored wire with austenitic-ferritic weld metal. Resistant to intergranular corrosion up to 300°C. Scale-resistant up to 1050°C. Work hardening. Cold tough down to –60 °C.
Maximum permissible operating temperature –60 °C to 300 °C.

Technical data
EN ISO 17633 - A: T 23 12 L R M(C) 3
AWS A5.22: E309LT0-4
Mat.

Typical applications
For dissimilar welded joints of stainless austenitic steels, e.g.:
1.4301 - X 5 CrNi 18-10 (X 5 CrNi 18-9),
1.4306 - X 2 CrNi 19-11 (X 2 CrNi 18-9),
1.4308 - GX 6 CrNi 18-9,
1.4401 - X 5 CrNiMo 17-12-2 (X 5 CrNiMo 18-10),
1.4404 - X 2 CrNiMo 17-13-2 (X 2 CrNiMo 18-10),
1.4408 - GX 6 CrNiMo 18-10,
1.4435 - X 2 CrNiMo 18-14-3 (X 2 CrNiMo 18-12),
1.4436 - X 5 CrNiMo 17-13-3 (X 5 CrNiMo 18-12),
1.4541 - X 6 CrNiTi 18-10,
1.4550 - X 6 CrNiNb 18-10 (X 10 CrNiNb 18-9),
1.4552 - GX 5 CrNiNb 18-9,
1.4571 - X 6 CrNiMoTi 17-12-2,
1.4573 - X 10 CrNiMoTi 18-12,
1.4580 - GX 10 CrNiMoNb 18-10,
1.4581 - GX 5 CrNiMoNb 18-10,
1.4583 - X 10 CrNiMoNb 18-12,
1.4948 - X 6 CrNi 18-11
with unalloyed and low-alloy steels such as:
P 265 GH, 17 Mn 4, StE 255 to StE 355
and corresponding cast steel. Also for welding hardfacing and buffer layers on hardenable steels.

Processing instructions
Clean the welding area. Limit the interpass temperature to 150 °C. Use wire brushes made of austenitic CrNi steels. A plastic liner and contact tip, as for welding aluminium, are recommended.

Welding positions: PA, PB
Current type: = (+)
Shielding gas - EN ISO 14175:
M21 Ferroline C 18 (max. 18 % Co2 - 82 % Ar)

Approvals
TÜV, DB (43.024.04), CE