EnDOtec DO*554 S Flux-cored wire

Flux-cored wire for use with stainless steel

EnDOtec DO*554 S, Ø 1.2mm, 15.0 kg

Rutile-basic flux-cored wire for gas-shielded welding, designed for production processes and joints where high reliability and dependability are required.
Designed for joining heterogeneous and poorly weldable steels. Recommended for austenitic manganese steels.
Weld metal with excellent resistance to cracking and surface hardening for impact and pressure resistance.

  • High arc stability.
  • Low heat input, lower dilution.
  • Excellent weldability.
  • Easy to remove slag.
  • High deposition rate.

Technical data
EN ISO 17633-A: T 18 8 Mn R M 3
AWS A5.22: E307 T0-4
Mat. reference: 1.4370

Applications
Industries and equipment: chemical, pharmaceutical, petrochemical, refineries. Food industry: sugar factories, dairy industry, wine industry. Breweries and all types of boiler construction. Containers, supporting layers, orders to reduce impact, armour plating

Processing instructions

  • Welding equipment
    The flux cored wire DO*554 S is fully compatible with conventional power sources. Programmable units with pulsed arcs provide optimal performance.
  • Preparation
    Before welding, the workpiece must be provided with a bevel for X or V welds, which is particularly suitable for thick welds. The areas to be welded and the surrounding area must be kept particularly clean.
  • Preheating
    Preheating is not normally necessary for stainless steels. However, if ferritic steel is to be joined to austenitic steel, it may be necessary to preheat the ferritic area, depending on the type and size of the workpiece to be welded.
  • Welding parameters
    Welding current and polarity: DC= (+)
    Stick-out: 15 – 20 mm
    Ø (mm) 1.2 
    Voltage (V) 20 – 34 
    Current (A) 120 – 280
  • Welding technique
    To achieve a better penetration for welds requiring multiple passes, the welding torch must be held at an angle of 70 – 80°.
  • Machining the weld
    The weld metal can be machined or ground and can be cut with a gouging torch (Arc-Air) or a plasma arc.
  • Shielding gas
    Recommended gas: 82 % Ar, 18 % CO2 [ISO 14175 M21]
    Alternative gas: 98 % Ar, 2 % CO2 [ISO 14175 M12]
    Gas flow (l/min): 14
  • Welding positions
    PA, PB [ISO 06947]

Approvals
TÜV, DB

Specification

Code 764007
Category Highly alloyed
Number in package 15.0 kg
Price per unit 11.845,548 Ft / kg
Price excl. VAT 177.683,22 Ft
Price incl. VAT 27% 225.657,69 Ft
Availability within 7 to 10 days
Material Safety data Sheets

Other products in the category