EutecTrode XHD 6710 Rod electrode

EutecTrode XHD 6710

Rutile-coated high-performance rod electrode with 250% recovery. Hypereutectic weld metal based on FeCrC. Admissible operating temperatures up to 650 °C. Withstands severe abrasion by rolling or sliding mineral materials under simultaneous pressure and light impact.

Technical data
DIN EN 14700: E Fe15
hardness: ~55 - 65 HRC

Applications
For the build-up welding of unalloyed and low-alloy steels, cast steel materials and austenitic manganese steels.

Typical examples of use are:
Excavator buckets, mixer blades, scrapers, gravel pumps, crusher hammers, conveyor chains, extruders and screw conveyors.

Processing instructions
Remove any cracked or damaged material. Clean the welding area. Adjust the heat input during welding to the component, its material and dimensions. Austenitic manganese steels should be welded cold (≤ 300 °C) without preheating if possible. For hardenable steels, welding of a buffer layer is required.

Welding parameters
Welding positions: PA, PB
Current type: = (-) or ~
Open-circuit voltage: ≥ 50 V
Amperage (A)
Ø 3.2 mm: 100 – 170 A
Ø 4.0 mm : 140 – 220 A