Powder flame spraying
SuperJet -S- Eutalloy powder flame spraying system
Modular powder flame spraying system for wear protection applications with Eutalloy® powder alloys
- Improved safety through flow-optimized gas and powder transport
- Increased application performance for solid components or thick cross-sections
- Precise application on critical corners and edges
- Reduced overspray minimizes spray losses and reworking
Powder flame spraying of Eutalloy® powders
SuperJet -S- Eutalloy® is an oxy-fuel torch that can be used to produce very precise wear-resistant coatings. The alloy powders are sprayed onto the component to be coated and melted at the same time. Independent tests and extensive practical trials guarantee quality standards in powder flame spraying as well as performance and precision in the areas of maintenance and repair.
The wetting properties of the alloys are based on the synergistic nature of some essential alloy components. These prevent oxide formation on the substrate surface during spraying and promote bonding with the base material.
An oxide-free surface is essential here. The melting ranges - depending on the type of alloy - can be between 850°C and 1,100°C. The spraying distances can vary between 6 and 20 mm.
Modular design
Thanks to the modular design of the system, all components can be removed for cleaning, maintenance and, if necessary, replacement.
Safety First
Every component and the complete torch is subjected to strict quality control. Safety devices such as a quick shut-off lever, which interrupts the gas supply to the burner, are built into the burner.
Scope of delivery
1 nozzle cleaner each A0 S, A1 S, A2 S, B3 S, B4 S, C5 S
1 injector cleaner each A0 S, A1 S, A2 S, B3 S, B4 S, C5 S
2-part heat shield
1 felt cleaner
1 screwdriver, 3.6 mm
1 open-end wrench 8''
1 gas lighter
1 pair of safety goggles
2 Teflon washers
when ordering the ESC 891213 additionally
1 torch tube each A0 S, A1 S, A2 S, B3 S, B4 S, C5 S included
Specification
| Code | 891198 |
|---|---|
| Category | Devices |
| Price excl. VAT | 1.666,50 £ |
| Price incl. VAT 20% | 1.999,80 £ |
| Availability | within 5 to 10 days |
Parameters
| Order performance | 0.5 - 5.0 kg/h |
|---|---|
| Flame output: Operating pressure: | 90 - 1,200 l/h |
| Flame output: Acetylene | 80 - 1,100 l/h |
| Operating pressure: Operating pressure: | 1.5 - 2.5 bar |
| Operating pressure: Acetylene | 0.5 - 0.6 bar |
| Weight (without powder and gas hoses) | 1.1 kg |
