Brass solder for applications
Castolin 185
Nickel-alloyed brazing alloy based on CuZn. Good modeling properties. Excellent wetting properties. High hardness and wear resistance. Low coefficient of friction with metallic sliding friction. Can be machined.
Technical data
Brazing alloy ISO 17672: Cu 773
EN 1044: CU 305
DIN 8513: L-CuNi10Zn42
Flux content* EN 1045: FH 21
DIN 8513: F-SH2
Melting interval (Sol./Liq.) [°C]: 890 - 915
Working temperature [°C]: 915
Density [g/cm3]: 8.3
Hardness [HB]: 160 - 200
* if flux-coated/containing flux
Applications
For build-up soldering, e.g: Unalloyed and low-alloy steels (structural steels, case-hardening, heat-treatable and nitriding steels), copper and copper alloys, malleable cast iron (GTW), nickel silver (CuNiZn alloys) and cast iron materials (GJS).
Typical application examples are
Pump impellers, axles, bearing shells, slideways, slide and valve seats, bearing blocks, slide rollers, worm gears, fan and pump shafts, shift forks, control disks and crank pins.
Processing instructions
Clean soldering areas. Round off edges. Coat soldering surfaces with flux. Heat the tip of the soldering rod and dip it into the flux. Preheat the workpiece widely and continuously. Do not overheat. Remove corrosive flux residues.
Heat sources: Flame soldering (acetylene; slightly oxidizing)
Delivery form
Castolin 185: bare solder rod
Castolin 185 XFC: flexible flux-coated solder rod
Specification
| Code | 205622 |
|---|---|
| Category | Brass plumb bobs |
| Number in package | 2.5 kg |
| Price per unit | 113,316 £ / kg |
| Price excl. VAT | 283,29 £ |
| Price incl. VAT 20% | 339,95 £ |
| Availability | within 5 to 10 days |
